SPECIALTY CASTABLE POLYURETHANES
"Solutions that add value instead
of just cost"
The following urethane elastomers were developed by
Crosslink Technology Inc. to accommodate applications requiring soft, abrasion
resistant materials. These castable urethanes provide ease of processing
fast gel time and excellent cured properties. These elastomers are especially
suited for casting, potting, rapid tooling and other cast urethane components.
Aliphatic versions of these formulations provide improved performance.
Our
recently developed 3 component, variable hardness polyurethane is especially
suited to applications requiring frequent changes in the cured hardness of the elastomer. The cured hardness can be adjusted just by using a different mix
ratio.
Variable Hardness Urethane
| Click the image to download
Acrobat® (if you need it)---------------> |
 |
| Read our technical paper
presented at the PMA
Conference-----> |
 |
Below is a list of our most popular materials. Special requests are
welcome!
| SPECIALTY MDI
BASED POLYURETHANE COMPOUNDS |
|
Product
No: |
Hardness |
Pot
Life(@220C) |
Gel
Time( @ 220C) |
De-mould
Time (@1000C) |
|
CLC 1A-005 |
5A |
20 - 25 Minutes |
30 - 40 Minutes |
30 - 40 Minutes |
|
CLC 1A-010 |
10A |
20 - 25 Minutes |
30 - 40 Minutes |
30
- 40 Minutes |
|
CLC 1A-020 |
20A |
20 Minutes |
30
- 45 Minutes |
20
- 40 Minutes |
|
CLC 1A-025 |
25A |
20 Minutes |
30
- 45 Minutes |
15 - 30 Minutes |
|
CLC 1A-030 |
30A |
20 Minutes |
30 - 45 Minutes |
15 - 30 Minutes |
|
CLC 1A-040 |
40A |
20 Minutes |
30
- 45 Minutes |
10 - 20 Minutes |
|
CLC 1A-045 |
45A |
15
Minutes |
30
- 45 Minutes |
10
- 20 Minutes |
|
CLC 1A-050 |
50A |
15
Minutes |
25
Minutes |
10 - 20 Minutes |
|
CLC 1A-060 |
60A |
8
- 10 Minutes |
15
- 20 Minutes |
10
- 15 Minutes |
|
CLC 1A-067 |
67A |
8 - 10 Minutes |
15 - 20 Minutes |
10 - 15 Minutes |
|
CLC 1A-070 |
70A |
8
- 10 Minutes |
15
- 20 Minutes |
15 - 25 Minutes |
|
CLC
1A-074 |
74A |
15 - 20 Minutes |
20 - 30 Minutes |
25 - 35 Minutes |
|
CLC 1A-080 |
80A |
8
Minutes |
10
- 20 Minutes |
20 - 25 Minutes |
|
CLC 1A-085 |
85A |
8
Minutes |
15
- 20 Minutes |
12 - 20 Minutes |
|
CLC 1A-090 |
90A |
4
- 5 Minutes |
6
- 7 Minutes |
10
- 12 Minutes @ 600C |
|
CLC 1A-095 |
95A |
4 - 6 Minutes |
8 - 10 Minutes |
12
- 17 Minutes @ 600C |
|
CLC 1D-078 |
78D |
5 Minutes |
4.5 - 5.5 Minutes |
1 - 2 Hrs. @ 220C |
| LOW (FREE) TDI POLYURETHANE
SYSTEMS |
| Product No: |
Hardness |
Pot Life (220C) |
De-mould Time |
Cure |
|
CLC
2A-090 |
90A |
12 - 15 Minutes |
20 - 25 Min.@1500F |
4Hrs
@ 100C |
|
CLC
2A-095 |
95A |
15
- 20 Minutes |
30
Minutes @ 600C |
16Hrs @ 60-800C |
|
CLC
2D-052 |
52D |
10
- 12 Minutes |
15 - 20 Min. @ 60-800C |
4Hrs
@ 100C |
|
CLC
2D-058 |
58D |
10
Minutes |
15
- 20 Minutes |
16 Hrs @ 800C |
|
CLC
2D-065 |
65D |
6
- 8 Minutes |
15
- 20 Min. @ 1000C |
4Hrs
@ 1000C |
| LOW DENSITY POLYURETHANE SYSTEMS |
| Product No: |
Hardness |
Pot Life |
Gel Time |
Mix Ratio |
Cure |
|
XPD1395/CLI4182 |
20A (±3) |
15 - 20 Minutes |
30 - 45 Minutes |
100:23 |
48 Hrs @ RT |
|
XPD1401/CLI4182 |
60A (±3) |
15 - 20 Minutes |
30 - 40 Minutes |
100:50 (100:29 V) |
48 Hrs @ RT |
Could not find what you need?
Search our database
for urethane products, based on basic handling parameters you
specify.
Click Here to get a recommendation
for your urethane requirements based on handling needs and the properties you specify.
Back to Top
| 
