|
| |
 |
ADHESIVES AND
SEALANTS "Solutions that add value instead of just cost " |
Epoxy and Polyurethane Adhesives and Sealants
Responding to customer requirements
for Epoxy and Polyurethane adhesives and sealants,
Crosslink Technology Inc. developed
some unique
products for applications in the following areas;
| > |
Epoxy and Urethane Adhesives for various types of filters (2 component and single component).
|
| > |
Fast setting epoxy adhesives for sealing welds on steel components.
|
| > |
Structural adhesives (epoxy or urethane).
|
| > |
Single component
epoxy adhesives. |
| > |
Easy to use, 1: 1 ratio
general purpose epoxy adhesives and sealants.
|
Materials are recommended based on the application at hand. You may specify the desired
handling and performance criteria by sending us an
e-mail via the link at the bottom of this page.
|
| All data sheets are in PDF format. Click the image to download Acrobat® reader.. |
 |
Below is a list of our more popular products. Special requests are
welcome! (Please submit the form at the bottom of this page.)
| Product No: |
Description |
Features |
|
CLR1185/CLH6372 |
General Adhesive RT cure. |
Resistant to Toluene, Ethanol, Aviation
Gas and Diesel Fuel. |
|
CLR1190/CLH6372 |
General purpose, 1300C
operation, R.T. cure |
Chemical resistant. |
|
CLR1190/CLH6560 |
Low viscosity, RT cure. |
Impact resistant. Excellent thermal
cycle |
|
CLR1370/CLH6560 |
General purose, shock resistant, R.T.
Cure. |
Excellent Tensile |
|
CLR1396/CLH6930 |
Extremely strong adhesive. |
Remains strong at elevated temperatures |
|
CLR1510/CLH6580 |
Low viscosity, RT cure. |
Excellent thermal shock resistance. |
|
CLC16-600 |
RT Cure, 5 Minute adhesive. |
Clear when cured, good for quick
repairs. |
|
CLC16-320 |
RT Cure, High Strength |
Extremely quick set for quick repairs. |
|
CLC16-228 |
RT Cure, patching, sealing epoxy. |
Excellent adhesion to plastics and most
metals. |
|
CLS9420 |
Single component, quick gel, heat cure |
No mixing. Good adhesion to most metals. |
|
XR5 1511/XH6 1512 |
A two component Structural Adhesive. |
Excellent for Aluminium structures.
|
|
XS5 1553 |
Single component, Quick gel at 1250C |
Excellent adhesion to most substrates. |
|
XRD 1071 |
Single component, heat cure, strong. |
No mixing, Good adhesion to most
substrates. |
Could not find what you need?
Click Here to get a recommendation
for your epoxy or urethane requirements based on handling needs and the properties you specify.
Back to Top
|
